**This is an old revision of the document!**
property:development:containers:connect_siding_to:Home
Summary
- The best in the business are domino clamps.
- very damn expensive
- only works at the corners.
* The DIY solution is to
- recognise that side holes are about 45×45 and top hole about 45×75. With inner lip about 12m.
- so we want a washer that is 45+12+12=69…so 65mm washer.
- Either square, or use a couple of rounds (but since big hole, needs smaller washer behind it)
- round:
- square:
- Note it's 316 (which is better than 304)
- Bunnings:
- Zenith M20 Galvanised Round Flat Washer (37mm). Not enough
- https://www.bunnings.co.nz/zenith-m20-x-60-x-6mm-galvanised-square-washer_p0250849 (OK: 45+12=57mm…just)