Differences
This shows you the differences between two versions of the page.
| property:development:containers:connect_siding_to:home [2025/05/04 03:29] – created skys | property:development:containers:connect_siding_to:home [2025/05/05 00:56] (current) – skys | ||
|---|---|---|---|
| Line 17: | Line 17: | ||
| * The best in the business are domino clamps. | * The best in the business are domino clamps. | ||
| * very damn expensive | * very damn expensive | ||
| - | | + | * https:// |
| - | * The DIY solution is to | + | |
| - | * recognise that side holes are about 45x45 and top hole about 45x75. With inner lip about 12m. | + | * The DIY solution is to: |
| - | * so we want a washer that is 45+12+12=69...so 65mm washer. | + | |
| - | * Either square, or use a couple of rounds (but since big hole, needs smaller washer behind it) | + | |
| - | * round: | + | * so we want a washer that is 45+12+12=69...so 65mm washer. |
| - | * https:// | + | * Either square, or use a couple of rounds (but since big hole, needs smaller washer behind it) |
| - | * https:// | + | * round: |
| - | * https:// | + | * https:// |
| - | * square: | + | * https:// |
| - | * https:// | + | * https:// |
| - | * Note it's 316 (which is better than 304) | + | * https:// |
| - | * Bunnings: | + | |
| - | * Zenith M20 Galvanised Round Flat Washer (37mm). Not enough | + | |
| - | * https:// | + | * Note it's 316 (which is better than 304) |
| - | * https:// | + | * Bunnings: |
| - | * https:// | + | * Zenith M20 Galvanised Round Flat Washer (37mm). Not enough |
| - | * https:// | + | * https:// |
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * For in betweens: | ||
| + | * Need to C clamp to the top bar (160–180 mm tall and 50–60 mm wide) | ||
| + | * So, put horizontally, | ||